| 中文EnglishWap
Your are here| Home | Products |Displacement Sensors
Product name:Brake Indicator
The product model:KYN01 Series

application:KYN01-B switch indicator is used for monitoring the status of the brake/brake pad:”prepad worn “(Brake pad almost worn) and “pad worn”(Pad replacement required). When the indicator is fitted to the brake a plunger/extender pin (if fitted) extends through a hole in the yoke and touches the brake pad (active brakes) or through the endcap and touches the push rod and detects the range of wear (AWA brake).

 
  • Details
  • Specifications
  • Product Diagram

Description

The main function of this switch is to measure piston movement and send out the Alarm signal. The surverying rod touch and move with the  measured surface. The output signal will be changed when the surveying rod reach at the warning point 1/2 and the switch will send corresponding control signal.

 

Applications

The indicator is supplied with pre-set switch points to suit the specific

brake type and selected pad wear level.

 

 

Features

The brake indicator is available in 10~36VDC only. The indicator can be delivered with different cable types (non-shielded, shielded or without cable), different cable lengths (5,10,15m) and M12 plug (angle or straight).

 

Product Approval:

KYN01 brake indicator has been successfullyby the relevant agencies CE certification and 3500V resistance voltage insulation test third party inspection certificate.

Application Description

KYN01-B switch indicator is used for monitoring the status of the brake/brake pad:”prepad worn “(Brake pad almost worn) and “pad worn”(Pad replacement required). When the indicator is fitted to the brake a plunger/extender pin (if fitted) extends through a hole in the yoke and touches the brake pad (active brakes) or through the endcap and touches the push rod and detects the range of wear (AWA brake).

Specifications

  • Operating Temperature:-40~+80℃
  • Voltage supply: 10~36VDC
  • Maximum load current: 100mA
  • Switching tolerance:±0.3mm
  • Max. stroke: 18mm
  • Protection grade:IP65(mounted)
  • Max Tightening torque G1/2: 20Nm
  • Max Tightening torque M12: 1.5Nm
  • Max no. of operations: 1million
  • Cable Dimensions: PUR 5*0.2mm2
  • Spanner size: 24mm

Product Diagram

The switch has 5 pins, when the switch on off working state, pin 1 and 4 NC, pin 2 and 3 NC, pin 2 and 5 NO. when the probe arrive at the Warning point 1, pin 1 and 4 NC, pin 2 and 3 NC, pin 2 and 5 NO. when the probe arrive at the Warning point 2, pin 1 and 4 NO, pin 2 and 3 NO, pin 2 and 5 NC.

Product Dimension

 

Gross weight:KYN01-B: 0.4kg

KYN01-E: 1 kg

Net weight:KYN01-B: 0.2kg

                       KYN01-E: 0.5kg

Copyright@2014 Kang Yu-Control Systems Engineering Co., Ltd. Design: Sirui network
Join us ︳  Download   ︳Contact us   ︳ E-mail